Kegging

1/4" Barb w/1/4" Swivel Nut - Barley & Vine
$ 6.98
Flare Swivel Nut (1/4") & Barb Set, set of 2 1/4" Stainless steel barb with a 1/4" MFL threaded connection. Used to connect 1/4" ID hose (beer line) to a 1/4" threaded (MFL) connection such as a 1/4" MFL Tailpiece.
Flare Swivel Nut (1/4") & Barb Set, set of 2 1/4" Stainless steel barb with a 1/4" MFL threaded connection....
1/4" ID Beer Hose Line, 1 Foot - Barley & Vine
$ 4.95
Inner Diam. 1/4″ Outer Diam. 3/8″ Max. Pressure 50 psi¹ Max. Temp. 150 °F Length 100′ Clear, flexible, and food-safe, this polyvinyl chloride (PVC) tubing is perfect for handling beverages and liquids.
Inner Diam. 1/4″ Outer Diam. 3/8″ Max. Pressure 50 psi¹ Max. Temp. 150 °F Length 100′ Clear, flexible, and food-safe, this...
1/4" Nylon Flare Washer - Barley & Vine
1/4" x 3' Keg Draw Tube Brush - Barley & Vine
$ 8.90
Brush used to clean draw tube in 5 gallon Soda type keg.
Brush used to clean draw tube in 5 gallon Soda type keg.
12" x 5" Wall Drain Tray - Barley & Vine
14" by 6" Stainless Steel Wall Mount Drip Tray No Drain - Barley & Vine
$ 44.95
All Stainless steel drip tray easily mounts to almost any wall. Solid SS 304 1.2mm construction. 14" in width, 6" in depth with a 2" back splash with a brushed finish.
All Stainless steel drip tray easily mounts to almost any wall. Solid SS 304 1.2mm construction. 14" in width, 6"...
3-1/2" Long Chrome Plated Brass Nipple Shank - 1/4" bore - Barley & Vine
$ 14.95
3-1/2" long Chrome Plated Brass Nipple Shank - 1/4" bore Install through the wall or door of a refrigerator to convert it to a kegerator. You will also need a beer faucet, handle, and hosing to connect to your keg.
3-1/2" long Chrome Plated Brass Nipple Shank - 1/4" bore Install through the wall or door of a refrigerator to...
3/16" by 1/4" Stainless Steel Splicer - Barley & Vine
3/16" Chrome Plated Elbow Nipple - Barley & Vine
3/16" Stainless Steel Tee - Barley & Vine
3/16" x 3/16" Stainless Steel Splicer - Barley & Vine
4" by 6" Stainless Steel Wall mount drip Tray - Barley & Vine
5 Gallon Keg Insulator Sleeve - Barley & Vine
$ 51.99
Neoprene helps prevent temperature escape. Helps protect product tank. Integrated pocket for use with the Ice Blanket. Simple and easy to use. When used with ice blanket, keeps product cold for up to 24 hours. AMERICAN MADE USING ONLY THE HIGHEST QUALITY MATERIALS AND WORKMANSHIP TO INSURE DURABILITY AND LONG LIFE. Note: Keg not included. Shown for demonstration purposes only.
Neoprene helps prevent temperature escape. Helps protect product tank. Integrated pocket for use with the Ice Blanket. Simple and easy...
8" Chrome Plated Brass Pump - Barley & Vine
Adjustable Hose Clamp, 1/8" to 1/2" - Barley & Vine
$ 1.49
Adjustable Hose Clamp for hose diameters of 1/8" to 1/2" All stainless Steel.
Adjustable Hose Clamp for hose diameters of 1/8" to 1/2" All stainless Steel.
Adjustable Hose Clamp, 5/16" to 7/8" - Barley & Vine
Ball Lock Firestone Poppet Valve - Barley & Vine
$ 2.99
Because Firestone kegs do not take the universal poppet valve, we’re fully equipped with special Firestone poppet valves to fix your leaky soda keg posts.
Because Firestone kegs do not take the universal poppet valve, we’re fully equipped with special Firestone poppet valves to fix...
Ball Lock Keg Post O-Ring - Green - Barley & Vine
$ 0.69
Green o-rings for ball-lock kegs
Green o-rings for ball-lock kegs
Ball-Lock Liquid, Threaded - Barley & Vine
$ 6.95
This liquid side ball-lock disconnect has a 1/4" threaded connection which allows you to easily switch between kegs include commercial sanke kegs as well as use different diameter hosing.
This liquid side ball-lock disconnect has a 1/4" threaded connection which allows you to easily switch between kegs include commercial...
Ball-Lok Gas Fitting, Threaded - Barley & Vine
$ 6.95
This Ball Lock Gas Fitting is threaded so you can attach a barbed swivel nut to the fitting along with the appropriate sized tubing. This ball lock fitting works well with 5/16" gas tubing because you get a much tighter connection using the barbed swivel nut. Keep in mind that gray is for gas.
This Ball Lock Gas Fitting is threaded so you can attach a barbed swivel nut to the fitting along with...
Shopify secure badge