Chugger Pump: Stainless Steel Inline Pump

We are taking Advance Orders on this item. Shipment should arrive the end of March with delivery the first week in April.

Barley & Vine is proud to present the Chugger Stainless Beer Pump.

The pump head is all 316 stainless steel, the propeller is high temp polysulphone and the O-ring is high temp silicone, so it is all food grade material.

This is the side inlet model 1/2" MPT in and out. Mounting bracket and 6 foot cord attached. Magnetic drive impeller. Head is completely Food Grade up to 250°F. Can pump up to 7 gallons a minute, and up to 18ft above source.

Pump is not self priming, so it needs to be located below the source beer.

Since it is magnetic drive, flow can be controlled with a ball valve on the outlet.

Motor housing is not waterproof so you want shield it from possible splashing or drips.

And you may want to plug it into a GFCI outlet.

You may also need a 1/2" Ball valve 2 piece or 3 piece

1/2" Quick Connector Swivel Nuts

1/2" ID High Temp Tubing

Complete Specs:

Inlet 1/2" MPT Outlet 1/2"MPT 316 SS (Front Housing), 316 Stainless Steel (Rear Housing), Teflon (Thrust Washer), CLEAR Silicone (O-Ring), POLYSULFONE (Impeller)

Max Flow 7 GPM 22.7 LPM Max Head 18.6 FT 4.1 M Power .04 HP .029 KW Electrical 115V 50/60HZ Non-Submersible 60HZ 50HZ

Can handle liquids of 250F Materials are FDA Food Compliant Components are UL Recognized Approx. Ship. Weight(LBS) : 6 Voltage : 115